Rubber and Elastomer Testing and analysis Machine and Instrument

We Supply Rubber Testing and analysis Machine and Instrument

ISO 34-1:2015

Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces

ISO 34-2:2015

Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces

ISO 36:2020

Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics

ISO 37:2017

Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties

ISO 48-1:2018

Rubber, vulcanized or thermoplastic — Determination of hardness — Part 1: Introduction and guidance

ISO 48-2:2018

Rubber, vulcanized or thermoplastic — Determination of hardness — Part 2: Hardness between 10 IRHD and 100 IRHD

ISO 48-3:2018

Rubber, vulcanized or thermoplastic — Determination of hardness — Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale

ISO 48-4:2018

Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)

ISO 48-5:2018

Rubber, vulcanized or thermoplastic — Determination of hardness — Part 5: Indentation hardness by IRHD pocket meter method

ISO 48-6:2018

Rubber, vulcanized or thermoplastic — Determination of hardness — Part 6: Apparent hardness of rubber-covered rollers by IRHD method

ISO 48-7:2018

Rubber, vulcanized or thermoplastic — Determination of hardness — Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method

ISO 48-8:2018

Rubber, vulcanized or thermoplastic — Determination of hardness — Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method

ISO 48-9:2018

Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers

ISO 132:2017

Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)

ISO 188:2011

Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests

ISO 247-1:2018

Rubber — Determination of ash — Part 1: Combustion method

ISO 247-2:2018

Rubber — Determination of ash — Part 2: Thermogravimetric analysis (TGA)

ISO 289-1:2015

Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity

ISO 289-2:2020

Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics

ISO 289-3:2015

Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR

ISO/TS 289-4:2017

Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate

ISO 812:2017

Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness

ISO 813:2019

Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method

ISO 814:2017

Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method

ISO 815-1:2019

Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures

ISO 815-2:2019

Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures

ISO 1407:2011

Rubber — Determination of solvent extract

ISO 1408:1995

Rubber — Determination of carbon black content — Pyrolytic and chemical degradation methods

ISO 1431-1:2012

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing

ISO 1431-3:2017

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers

ISO 1432:2021

Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test)

ISO 1817:2015

Rubber, vulcanized or thermoplastic — Determination of the effect of liquids

ISO 1827:2016

Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods

ISO 1853:2018

Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity

ISO 2007:2018

Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method

ISO 2285:2019

Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

ISO 2454:1995

Rubber products — Determination of zinc content — EDTA titrimetric method

ISO 2781:2018

Rubber, vulcanized or thermoplastic — Determination of density

ISO 2782-1:2016

Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods

ISO 2782-2:2018

Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equal-pressure method

ISO 2878:2017

Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance

ISO 2921:2019

Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)

ISO 2951:2019

Rubber, vulcanized rubber — Determination of insulation resistance

ISO 3384-1:2019

Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature

ISO 3384-2:2019

Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling

ISO 3387:2020

Rubber — Determination of crystallization effects by hardness measurements

ISO 3865:2020

Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material

ISO 4645:1984

Rubber and rubber products — Guide to the identification of antidegradants — Thin layer chromatographic methods

ISO 4645:1984/COR 1:1991

Rubber and rubber products — Guide to the identification of antidegradants — Thin layer chromatographic methods — Technical Corrigendum 1

ISO 4647:2021

Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test

ISO 4649:2017

Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device

ISO 4650:2012

Rubber — Identification — Infrared spectrometric methods

ISO 4661-2:2018

Rubber, vulcanized — Preparation of samples and test pieces — Part 2: Chemical tests

ISO 4662:2017

Rubber, vulcanized or thermoplastic — Determination of rebound resilience

ISO 4664-1:2011

Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance

ISO 4664-2:2006

Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 2: Torsion pendulum methods at low frequencies

ISO 4664-3:2021

Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 3: Glass transition temperature (Tg)

ISO 4665:2016

Rubber, vulcanized or thermoplastic — Resistance to weathering

ISO 4666-1:2010

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles

ISO 4666-3:2016

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)

ISO 4666-4:2018

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 4: Constant-stress flexometer

ISO 5600:2017

Rubber — Determination of adhesion to rigid materials using conical shaped parts

ISO 5603:2017

Rubber, vulcanized — Determination of adhesion to wire cord

ISO 5893:2019

Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification

ISO 5893:2019/AMD 1:2020

Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification — Amendment 1

ISO 6101-1:2019

Rubber — Determination of metal content by atomic absorption spectrometry — Part 1: Determination of zinc content

ISO 6101-2:2019

Rubber — Determination of metal content by atomic absorption spectrometry — Part 2: Determination of lead content

ISO 6101-3:2014

Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content

ISO 6101-4:2014

Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content

ISO 6101-5:2018

Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content

ISO 6101-6:2018

Rubber — Determination of metal content by atomic absorption spectrometry — Part 6: Determination of magnesium content

ISO 6133:2015

Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

ISO 6179:2017

Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique)

ISO 6502-1:2018

Rubber — Measurement of vulcanization characteristics using curemeters — Part 1: Introduction

 

ISO 6502-2:2018

Rubber — Measurement of vulcanization characteristics using curemeters — Part 2: Oscillating disc curemeter

ISO 6502-3:2018

Rubber — Measurement of vulcanization characteristics using curemeters — Part 3: Rotorless curemeter

ISO 6505:2021

Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals

ISO 6914:2021

Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation in tension

ISO 6943:2017

Rubber, vulcanized — Determination of tension fatigue

ISO 7269:1995

Rubber — Determination of free sulfur

ISO 7269:1995/COR 1:2002

Rubber — Determination of free sulfur — Technical Corrigendum 1

ISO 7270-1:2020

Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)

ISO 7270-2:2012

Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio

ISO 7323:2006

Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel-plate method

83.040.10

ISO 7725:2020

Rubber and rubber products — Determination of chlorine and bromine content

ISO 7743:2017

Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties

ISO 8013:2019

Rubber, vulcanized — Determination of creep in compression or shear

ISO 8053:1995

Rubber and latex — Determination of copper content — Photometric method

ISO 9026:2021

Raw rubber or unvulcanized compounds — Determination of green strength

ISO 9028:2006

Rubber — Dissolution by acid digestion

ISO 9924-1:2016

Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers

ISO 9924-2:2016

Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers

ISO 9924-3:2009

Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction

ISO 10398:1998

Rubber — Identification of accelerators in cured and uncured compounds

ISO 10638:2017

Rubber — Identification of antidegradants by gas chromatography/mass spectrometry

 

ISO 11345:2006

Rubber — Assessment of carbon black and carbon black/silica dispersion — Rapid comparative methods

 

ISO 11346:2014

Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use

 

ISO/TR 12134:2010

Rubber — Estimation of uncertainty for test methods — Non-functional parameters

 

ISO 12493:2017

Rubber, vulcanized — Determination of stress in tension upon heating

 

ISO 13145:2012

Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer

 

ISO 13226:2018

Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers

 

ISO 14309:2019

Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity

 

ISO 15113:2005

Rubber — Determination of frictional properties

 

ISO 15671:2000

Rubber and rubber additives — Determination of total sulfur content using an automatic analyser

 

ISO 15672:2000

Rubber and rubber additives — Determination of total nitrogen content using an automatic analyser

 

ISO 17257:2020

Rubber — Identification of polymers — Pyrolytic gas-chromatographic method using mass-spectrometric detection

 

ISO/TS 17796:2013

Rubber — Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection

 

ISO 18766:2014

Rubber, vulcanized or thermoplastic — Low temperature testing — General introduction and guide

 

ISO 18899:2013

Rubber — Guide to the calibration of test equipment

 

ISO 19003:2006

Rubber and rubber products — Guidance on the application of statistics to physical testing

 

ISO 19050:2021

Rubber, raw, vulcanized — Determination of metal content by ICP-OES

 

83.040.10

ISO 19242:2021

Rubber — Determination of total sulfur content by ion chromatography

 

ISO 19983:2017

Rubber — Determination of precision of test methods

 

ISO 19984-1:2017

Rubber and rubber products — Determination of biobased content — Part 1: General principles and calculation methods using the formulation of the rubber compound

 

ISO 19984-2:2017

Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content

 

ISO 19984-3:2017

Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content

 

ISO 20163:2019

Vulcanized rubber — Determination of free sulfur by gas chromatography (GC) and high performance liquid chromatography (HPLC)

 

ISO 20463:2018

Rubber and rubber products — Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials

 

ISO 23075:2021

Vulcanized rubbers — Determination of antidegradants by high-performance liquid chromatography

 

ISO 23233:2016

Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc

 

ISO 23233:2016/AMD 1:2017

Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc — Amendment 1

 

ISO 23337:2016

Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine

 

ISO 23529:2016

Rubber — General procedures for preparing and conditioning test pieces for physical test methods

 

ISO 23794:2015

Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance

 

ISO 24453:2008

Rubber — Acquisition and presentation of comparable single-point data

 

ISO 24454:2008

Rubber — Acquisition and presentation of comparable multi-point data

 

ISO 27727:2008

Rubber, vulcanized — Measurement of fatigue crack growth rate