We Supply GRP- FRP- Fiber-Textile-glass-reinforced plastics.
ISO 527-4:2021
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-5:2021
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
ISO 1172:1996
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
ISO/CD 1172
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
ISO 1268-1:2001
Fibre-reinforced plastics — Methods of producing test plates — Part 1: General conditions
ISO 1268-2:2001
Fibre-reinforced plastics — Methods of producing test plates — Part 2: Contact and spray-up moulding
ISO 1268-3:2000
Fibre-reinforced plastics — Methods of producing test plates — Part 3: Wet compression moulding
ISO 1268-4:2005
Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs
ISO 1268-4:2005/AMD 1:2010
Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs — Amendment 1
ISO 1268-5:2001
Fibre-reinforced plastics — Methods of producing test plates — Part 5: Filament winding
ISO 1268-6:2002
Fibre-reinforced plastics — Methods of producing test plates — Part 6: Pultrusion moulding
ISO 1268-7:2001
Fibre-reinforced plastics — Methods of producing test plates — Part 7: Resin transfer moulding
ISO 1268-8:2004
Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC
ISO 1268-9:2003
Fibre-reinforced plastics — Methods of producing test plates — Part 9: Moulding of GMT/STC
ISO 1268-10:2005
Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens
ISO 1268-11:2005
Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates
ISO 1887:2014
Textile glass — Determination of combustible-matter content
ISO 1888:2006
Textile glass — Staple fibres or filaments — Determination of average diameter
ISO 1888
Textile glass — Staple fibres or filaments — Determination of average diameter
ISO 1889:2009
Reinforcement yarns — Determination of linear density
ISO 1890:2009
Reinforcement yarns — Determination of twist
ISO 2078:1993
Textile glass — Yarns — Designation
ISO 2078:1993/AMD 1:2015
Textile glass — Yarns — Designation — Amendment 1
ISO/PRF 2078
Textile glass — Yarns — Designation
ISO 2113:1996
Reinforcement fibres — Woven fabrics — Basis for a specification
ISO 2113:1996/COR 1:2003
Reinforcement fibres — Woven fabrics — Basis for a specification — Technical Corrigendum 1
ISO/DIS 2113
Reinforcement fibres — Woven fabrics — Basis for a specification
ISO 2558:2010
Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene
ISO 2559:2011
Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications
ISO 2797:2017
Textile glass — Rovings — Basis for a specification
ISO 3341:2000
Textile glass — Yarns — Determination of breaking force and breaking elongation
ISO 3342:2011
Textile glass — Mats — Determination of tensile breaking force
ISO 3343:2010
Reinforcement yarns — Determination of twist balance index
ISO 3344:1997
Reinforcement products — Determination of moisture content
ISO 3374:2000
Reinforcement products — Mats and fabrics — Determination of mass per unit area
ISO 3375:2009
Textile glass — Determination of stiffness of rovings
ISO 3597-1:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods
ISO 3597-2:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
ISO 3597-3:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
ISO 3597-4:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength
ISO 3598:2011
Textile glass — Yarns — Basis for a specification
ISO 3616:2001
Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression
ISO 3616:2001/AMD 1:2017
Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression — Amendment 1
ISO/CD 3616
Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression
ISO/CD 4410
Experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO 4602:2010
Reinforcements — Woven fabrics — Determination of number of yarns per unit length of warp and weft
ISO 4603:1993
Textile glass — Woven fabrics — Determination of thickness
ISO 4603:1993/AMD 1:2010
Textile glass — Woven fabrics — Determination of thickness — Amendment 1
ISO 4604:2011
Reinforcement fabrics — Determination of conventional flexural stiffness — Fixed-angle flexometer method
ISO 4606:1995
Textile glass — Woven fabric — Determination of tensile breaking force and elongation at break by the strip method
ISO 4899:1993
Textile-glass-reinforced thermosetting plastics — Properties and test methods
ISO 4900:2011
Textile glass — Mats and fabrics — Determination of contact mouldability
ISO 5025:2017
Reinforcement products — Woven fabrics — Determination of width and length
ISO 7822:1990
Textile glass reinforced plastics — Determination of void content — Loss on ignition, mechanical disintegration and statistical counting methods
ISO/WD 8057
Determination of galvanic corrosion rate for assembled forms of carbon fibre reinforced plastics (CFRPs) and protection-coated metal — Electrochemical tests in neutral sodium chloride solution
ISO/CD 8060
Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Characterization of durability of adhesive interfaces by wedge rupture test
ISO/WD 8065
Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation
ISO 8516:2011
Textile glass — Textured yarns — Basis for a specification
ISO 8605:2001
Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
ISO 8606:1990
Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification
ISO 9163:2005
Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO 9782:1993
Plastics — Reinforced moulding compounds and prepregs — Determination of apparent volatile-matter content
ISO 10119:2020
Carbon fibre — Determination of density
ISO 10122:2014
Reinforcement materials — Tubular braided sleeves — Basis for a specification
ISO 10352:2020
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area
ISO 10371:1993
Reinforcement materials — Braided tapes — Basis for a specification
ISO 10548:2002
Carbon fibre — Determination of size content
ISO 10548:2002/COR 1:2008
Carbon fibre — Determination of size content — Technical Corrigendum 1
ISO 10618:2004
Carbon fibre — Determination of tensile properties of resin-impregnated yarn
ISO 11566:1996
Carbon fibre — Determination of the tensile properties of single-filament specimens
ISO 11567:2018
Carbon fibre — Determination of filament diameter and cross-sectional area
ISO 11667:1997
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods
ISO 12114:1997
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of cure characteristics
ISO 12115:1997
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of flowability, maturation and shelf life
ISO 12115:1997/COR 1:1998
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of flowability, maturation and shelf life — Technical Corrigendum 1
ISO 12815:2013
Fibre-reinforced plastic composites — Determination of plain-pin bearing strength
ISO 12817:2013
Fibre-reinforced plastic composites — Determination of open-hole compression strength
ISO 13002:1998
Carbon fibre — Designation system for filament yarns
ISO 13003:2003
Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions
ISO/TR 13883:1995
Plastics — Guide to the writing of test methods
ISO 13931:2013
Carbon fibre — Determination of volume resistivity
ISO 14125:1998
Fibre-reinforced plastic composites — Determination of flexural properties
ISO 14125:1998/AMD 1:2011
Fibre-reinforced plastic composites — Determination of flexural properties — Amendment 1
ISO 14125:1998/COR 1:2001
Fibre-reinforced plastic composites — Determination of flexural properties — Technical Corrigendum 1
ISO 14126:1999
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
ISO 14126:1999/COR 1:2001
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction — Technical Corrigendum 1
ISO/CD 14126
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
ISO 14127:2008
Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
ISO/WD 14127
Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
ISO 14129:1997
Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
ISO 14130:1997
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
ISO 14130:1997/COR 1:2003
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method — Technical Corrigendum 1
ISO 15024:2001
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
ISO/CD 15024
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
SO 15034:1999
Composites — Prepregs — Determination of resin flow
ISO 15039:2003
Textile-glass rovings — Determination of solubility of size
ISO 15039:2003/AMD 1:2015
Textile-glass rovings — Determination of solubility of size — Amendment 1
ISO 15040:1999
Composites — Prepregs — Determination of gel time
ISO 15100:2000
Plastics — Reinforcement fibres — Chopped strands — Determination of bulk density
ISO 15114:2014
Fibre-reinforced plastic composites — Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach
ISO 15310:1999
Fibre-reinforced plastic composites — Determination of the in-plane shear modulus by the plate twist method
ISO 17771:2003
Plastics — Thermoset moulding compounds — Determination of the degree of fibre wetting in SMC
ISO 18352:2009
Carbon-fibre-reinforced plastics — Determination of compression-after-impact properties at a specified impact-energy level
ISO 19927:2018
Fibre-reinforced plastic composites — Determination of interlaminar strength and modulus by double beam shear test
ISO 20144:2019
Fibre-reinforced plastic composites — Standard qualification plan (SQP) for composite materials, including reduced qualification plan (RQP) and extended qualification plan (EQP) schemes
ISO 20337:2018
Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
ISO/DIS 20975-1
Fibre-reinforced plastic composites — Determination of laminate of through-thickness properties — Part 1: Direct tension and compression tests
ISO 20975-2:2018
Fibre-reinforced plastic compositess — Determination of laminate through-thickness properties — Part 2: Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate, for carbon-fibre based systems
ISO 21746:2019
Composites and metal assemblies — Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres — Salt spray tests
ISO 22314:2006
Plastics — Glass-fibre-reinforced products — Determination of fibre length
ISO 22821:2021
Carbon-fibre-reinforced composites — Determination of fibre weight content by thermogravimetry (TG)
ISO 22836:2020
Fibre-reinforced composites — Method for accelerated moisture absorption and supersaturated conditioning by moisture using sealed pressure vessel
ISO 22838:2020
Composites and reinforcements fibres — Determination of the fracture energy of bonded plates of carbon fibre reinforced plastics (CFRPs) and metal using double cantilever beam specimens
ISO 22841:2021
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies — Determination of the tensile lap-shear strength
ISO 22841:2021/CD AMD 1
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies — Determination of the tensile lap-shear strength — Amendment 1: Precision data
ISO/DTS 23483.2
Carbon fibres — Determination of PAN-based carbon fibre tow characteristics — Heat transfer properties — Apparent thermal conductivity
ISO/DIS 23927
Laminates and moulding compounds — Prepregs — Determination of tack
ISO/DIS 23930
Fibre-reinforced plastic composites — Full section compression test for pultruded profiles
ISO/PRF 24360
Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Determination of the cross tension strength
ISO 30012:2016
Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects
ISO 30012:2016/AMD 1:2018
Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects — Amendment 1
Be the first to review “GRP- FRP- Fiber-Textile-glass-reinforced plastics”