ASTM D1185, ANSI 4996, JIS Z0602 Pallet Test Machine
EN ISO 8611-1: 2011 “Pallets for materials handling – Flat pallets – Part 1: Test methods ( COMESA 216)
EN ISO 8611-2: 2011 – Flat pallets – Part 2: Performance requirements and selection of tests
EN ISO 8611-3: 2011 – Flat pallets – Part 3: Maximum working loads
JIS Z 0602:1988 Test methods for flat pallets
ANSI 4996
Our machine can measure FOUR deformation at the same time. External expand for FOUR deformation sensors, so it can measure these deformations of 4 points.
Test modes:
1. Compression
2. Fixed value
3. Stacking
4. Bending strength test (1a, 1b),
5. Fork lift test (2a, 2b),
6. Padding block test (3a, 3b),
7. Stacking test (4a, 4b),
8. Bottom board compression test (5a, 5b),
9. Air cell bending test (7a, 7b)
Test modes:
1. Compression
2. Fixed value
3. Stacking
4. Bending strength test (1a, 1b),
5. Fork lift test (2a, 2b),
6. Padding block test (3a, 3b),
7. Stacking test (4a, 4b),
8. Bottom board compression test (5a, 5b),
9. Air cell bending test (7a, 7b)
- ISO 8611 Bottom deck bending tests: The purpose of this test is to determin the strength and stiffness of the bottom deck between block or stingers when handling on twin rack conveyors or narrow span beam rack supports
- ISO 8611 stacking test: The purpos of this test is to determine the ability of the pallet top and bottom decks to withstand the local effects of widely varaying payloads on subspans of decks between blocks and stringers in a bloch stacking situation.
- ISO 8611 stacking test: The purpos of this test is to determine the ability of the pallet top and bottom decks to withstand the local effects of widely varaying payloads on subspans of decks between blocks and stringers in a bloch stacking situation.
- ISO 8611 Compression tests for blocks or stringers: The purpose of this test is to determine the compression stiffness and strength of the blocks or stringers of te pallet.
- ISO 8611 corner drop test: The purpose of this test is to determine the diagonal rigidity of the top deck of the pallet and its resistance to impact.
- ISO 8611 Static air bag bending test: The purpose of this form of bendingtest is to simulate, as near as practically feasable, certain load applications as commonly encountered in the field.
- ISO 8611 static wing pallet bending test: The purpose of these tests is to determine the bending strength and the bending stiffness of winged pallet during lifting with slings
- ISO 8611 static bending test: The purpose of these tests is to determine the bending strength and the bending stiffness of pallet in the pallet in racking situations
Reviews
There are no reviews yet.
Be the first to review “ASTM D1185, ANSI 4996, JIS Z0602 Pallet Test Machine”