Textile Test Machines
Nonwoven Test Machine
Dyeing & Finishing Test Machine
Fabric Test Machine
Martindale Tester
Martindale Abrasion Tester is mainly applies to the resistance test of textile and outside layer, lining or under layer of the footwear or the similar fabric. Testing the samples as per the standard, test can be classified as dry test and wet test. And test the samples Lissajous-oriented for the regulated times, then observe the difference between it and the original samples and decide the grade of scrubbing resistance.
ASTM D4970, ISO12945-2 and other pilling degree test;
ASTM D4966, ISO12947 and other fabric abrasion tests.
Hydrostatic Head Tester
Hydrostatic Head Tester is used for testing the water permeability resistance to the compact cloth such as canvas, linoleum, tenting, tarpaulin, non-woven fabrics, rain resistant dress fabrics, coating fabrics and so on.
ISO 9073-16 Determination of resistance to penetration by water( hydrostatic pressure)
Air permeability testing equipment for textile
Air permeability testing equipment To determine the resistance of fabrics (woven, knitted and non-woven textile materials) to the passage of air (air flow) under constant pre-set air pressure while firmly clamped in the test rig of selected test head/area.
ASTM D737 Standard Test Method for Air Permeability of Textile Fabrics
ISO 9237 Textiles – Determination of the Permeability of Fabrics to Air
BS 5636, DIN 53887, AFNOR G07-111, EDANA 140.1, ISO 7231, ISO 9073-15, JIS L1096-A
TAPPI T251, WSP 070.1.R3, EDANA 140.2-99
Spray Impact Tester
ISO 9073-17 Textile-Test Methods for nonwovens- Determination of resistance to penetration by water(spray impact)
Automatic Hydraulic Bursting Tester
To determine the bursting strength and distension at burst of woven and knitted fabrics as well as technical textiles,non-wovens,bonded fabrics,plastics,leather (artificial and natural) and cardboard.
Testing standard
ASTM D 3786 Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics
Diaphragm Bursting Strength Tester Method
BS 4768 Determination of Bursting Strength and Bursting Distension
ISO 13938-1 Textiles – Bursting properties of fabrics, Hydraulic method for determination of bursting strength and bursting distension
ISO 2758 Paper – Determination of bursting strength
ISO 2759 Board – Determination of bursting strength
ISO 3303 Rubber – or plastics-coated fabrics – Determination of bursting strength – Hydraulic method
WSP 030.1.R3(12),BS 3424(PT6),ERT 80-4-20,EN 12332-2,IWS TM 29,ASTM D751,JIS L-1018
Textile Elmendorf Tearing Tester
Textile Elmendorf Tearing Tester ,also a kind of textile testing equipment,to determine the ballistic tearing strength of woven fabrics, plastic films, paper, Textile Elmendorf Tearing or other similar materials.
Textile: ASTM D1424, DIN 53862, EN ISO 13937-1, ISO 4674-2, ISO 9290, M&S P29, NEXT 17
Plastics: ASTM D1922, ISO 6383-2, JIS K 7128-2, NF T54 141
Nonwovens: ASTM D5734, WSP 100.1
Paper: APPITA P 400,ASTM D 689,BS 4468,CSA D9,DIN 53128,EN 21974,ISO 1974
Rotawash Colorfastness Tester
Rotawash Colorfastness Tester ,also as a kind of textile testing equipment,is applied to determine the textile dye washing color fastness, resistant to washing, resistant to dry cleaning and resistant to shrink of textile cotton, wool, silk jute and chemical fiber textiles.
ISO 105-C06,ISO 105-C08,ISO 105-C09,ISO 105-C10,ISO 105-D01,ISO 105-E03
AATCC 61,190 AATCC 86,132
M&S C04,M&S C05, M&S C10A, M&S C12A, M&S C37
BS 1006,JIS L0844
Electronic Crock Meter For Textile
Electronic Crock Meter ,also as a kind of textile testing equipment,is suitable for textiles, fabric, leather, electrochemical metal plate, printing and other industries products to do the color fastness to rubbing test evaluation.
Electronic Crock Meter Test standards: ISO105-X12 GB/T3920-2008 AATCC 2004 AATCC 8-2013 AATCC 165-1999
Non-woven Melt Flow Index Tester (MFR +MVR+PC)
Melt Flow Index Tester is used to test the flowability of thermoplastic polymer under high temperature, such as polyethylene, polypropylene, pom, ABS resin, polycarbonate, nylon fluorine and other plastic polymers. The automatic temperature control methods of the machine three kinds of blanking ways, manual, timing and automatic control according to operation method, which can realize melt-mass flow rate (MFR) and melt-volume flow rate (MVR) two test methods.
ASTM D1238 – ISO 1133
Rubbing Fastness Tester For Textile
AATCC 8 Colorfastness to Crocking: AATCC Crockmeter Method
AATCC 165 Colorfastness to Crocking: Textile Floor Coverings—Crockmeter Method
ISO 105-X12 Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing
BS 2543, BS 3424: Part 14, M&S C08, IKEA IOS-TM-0002, Mercedes Benz DBL 7384
Light Fastness Tester (xenon arc)
Light Fastness Tester used in rubber, plastics, paints, coatings, petrochemicals, automobiles, textiles and other industries and materials for solar radiation simulation of light color fastness, flashing color fastness and photoaging, through simulation of light, rain, spray The climatic conditions such as light and dark alternation, temperature and humidity, etc., to determine the fading, aging, fading, transmittance, peeling, hardening, softening and other performance changes of the material.
AATCC 16.3
EN ISO 105 B02
Powder Removal Rate Tester for Tissue Paper
Test for toilet paper powder removal rate
GB/T 20810-2018
Liquid Impermeable Tester
Determination of the remedial amount of sanitary material
Testing standard
GB/T 24248.4, ISO 9073-14
Textile Tensile Tester
Textile tensile tester as a textile test equipment usually used for cotton, wool, linen, silk, wool fiber fabric, non-woven fabric, paper, ribbon and nonwoven fabric yarn tensile breaking strength and breaking elongation of determination.
Test standard
GB/T 3923.1、GB/T 3923.2、GB/T 3917.2、GB/T 19976、ISO 13934.1、ISO 13934.2
ISO 13935.1、ISO 13935.2、ASTM D5035、ASTM D2261,ASTM D 5034
Textile Diaphram Bursting Tester With Automatic Hydraulic
Textile Diaphram Bursting Tester,also as a kind of textile testing equipment,;a multidirectional force generated by hydrostatic pressure is applied on fabric to check the strength of that fabric, this phenomenon is called bursting strength testing.Automatic Hydraulic Diaphram Bursting Tester is specially designed to perform the bursting strength testing of kitted fabrics, with pneumatic control.It can also be used for leather, paper & card Boards etc.
Smith Barney Inc. are now able to offer a technically advanced machine that is easy to use and inexpensive to own.
USAGE
Textile Diaphram Bursting Tester To determine the bursting strength and distension at burst of woven and knitted fabrics as well as technical textiles,non-wovens,bonded fabrics,plastics,leather (artificial and natural) and cardboard.
TESTING STANDARDS
ASTM D 3786 Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics
Diaphragm Bursting Strength Tester Method
BS 4768 Determination of Bursting Strength and Bursting Distension
ISO 13938-1 Textiles – Bursting properties of fabrics, Hydraulic method for determination of bursting strength and bursting distension
ISO 2758 Paper – Determination of bursting strength
ISO 2759 Board – Determination of bursting strength
ISO 3303 Rubber – or plastics-coated fabrics – Determination of bursting strength – Hydraulic method
WSP 030.1.R3(12),BS 3424(PT6),ERT 80-4-20,EN 12332-2,IWS TM 29,ASTM D751,JIS L-1018
ICI Pilling Tester 6 box
Pilling is a fabric surface phenomenon characterized by little balls formed by entangled fibers clinging to the surface. These are formed during wearing or washing by the entanglement of the loose fibers, which protrude from the fabric surface, and development of these into spherical bundles anchored to the fabric by a few unbroken fibers. These give a very unsightly look to the garments. To determine the tendency to form pills, test specimens taken from the fabric sample are rubbed against each other under controlled conditions. The appearance of the test specimen, after rubbing for the specified period, is compared against standard rating photographs (Woven pilling photographs and knitted pilling photographs) for grading the fabric. ICI Pilling and Snagging Tester is specially designed equipment to access resistance to pilling of any type of fabrics as per ICI pilling system.
Smith Barney Inc. are now able to offer a technically advanced machine that is easy to use and inexpensive to own.
Usage:
To determine the pilling and snagging resistance of textile fabrics.
Test standard:
ISO 12945-1,BS 5811,IWSTM 152,NEXT 19,JIS L1076,M&S P18,M&S P21A,BS 8479
ICI Pilling tester 4 box
Pilling is a fabric surface phenomenon characterized by little balls formed by entangled fibers clinging to the surface. These are formed during wearing or washing by the entanglement of the loose fibers, which protrude from the fabric surface, and development of these into spherical bundles anchored to the fabric by a few unbroken fibers. These give a very unsightly look to the garments. To determine the tendency to form pills, test specimens taken from the fabric sample are rubbed against each other under controlled conditions. The appearance of the test specimen, after rubbing for the specified period, is compared against standard rating photographs (Woven pilling photographs and knitted pilling photographs) for grading the fabric. ICI Pilling and Snagging Tester is specially designed equipment to access resistance to pilling of any type of fabrics as per ICI pilling system.
Smith Barney Inc. are now able to offer a technically advanced machine that is easy to use and inexpensive to own.
Usage:
To determine the pilling and snagging resistance of textile fabrics.
Test standard:
ISO 12945-1,BS 5811,IWSTM 152,NEXT 19,JIS L1076,M&S P18,M&S P21A,BS 8479
ICI Pilling tester 2 box
ISO 12945-1,BS 5811,IWSTM 152,NEXT 19,JIS L1076,M&S P18,M&S P21A,BS 8479
Martindale Abrasion tester with 4 stations
GB / T4802.2, ASTM D4970, ISO12945-2 and other pilling degree test;
GB / T13775, ASTM D4966, ISO12947 and other fabric abrasion tests.
Friction Coefficient Tester
The friction coefficient tester is mainly used to measure the static friction coefficient and dynamic friction coefficient of plastic film and thin sheet or other similar material. The matching control software can directly understand the films smoothness and opening, and show the distribution of the slipping agent through the curve. The smoothness measurement of material, production process quality indicators can control and adjust the packing bag opening, packing machine, package speed, meet the product requirements.
Testing standard
GB/T 22895
GB 10006, ASTM D 1894 -01, ISO 8295, TAPPI 816
Absorption Rate Tester of Tissue
Tester for absorption rate of various sanitary napkins, pads, etc.
Testing standard
GB/T 8939-2018
Ball Burst Strength Tester for Tissue
Determination of ball burst strength for tissue paper
Testing standard
GB/T 20810-2018 GB/T 24328.7
ISO 12625-9
UV Aging Chamber UVA
The aging test project refers to the process of strengthening the experiment in the condition that the products are related to the aging condition. The UV Aging chamber simulates the damaging effects of sunlight, moisture and temperature on the material, especially for testing the durability of outdoor products or materials.
The UV Aging chamber is able to perform accelerated aging tests on the strengthened UV environment. Imported Atlas 40w/piece UV lamp, UV: 315-400nm (8pcs, 1600h lifetime), test ambient temperature, humidity can be set in intelligent control system. The rate and capacity of water spraying can be set.
ISO 4892-3,ASTM G154..
Fabric Shrinkage Test Machine (Automatic Washer)
Fabric Shrinkage Test machine is used for testing the dimensional stability of fabrics, clothing and other textiles after washing.
Test standard
ISO 6330-2012 , GB/T 8629 ,FZ/T 70009,IEC 60456
BS 4923 Methods for individual domestic washing and drying for use in textile testing
BS EN ISO 6330 Textiles. Domestic washing and drying procedures for textile testing
Schildknecht Flexing Tester
Schildknecht Flexing Tester is designed to determine the resistance of coated fabrics to damage by Flexing due to oscillation at 500 times per minute. Accommodating 10 specimens, and safety shield is offered to protect operator. Test speed, the counting, the timing are set and displayed on the LCD and controller.
Standard
ISO 7854 , BS 3424
Mask Air Permeability Tester
Mask Air Permeability Tester is used to measure the pressure difference index of medical surgical masks under specified conditions.
Test standard
YY 0469-2011
Y/T 0969-2013
EN14683:2019
Mask Particulate Filtration Efficiency Test Machine(PFE)
Mask Particulate Filtration Efficiency Test Machine is suitable for fast, accurate and stable detection of particulate filtering efficiency of various medical and daily protective masks, respirators, etc.
Test standard
GB/T 19083-2010 5.4
YY/T 0469-2011 5.6.2
GB/T 32610-2016
GB 2626-2019 6.3
GB 19082-2009 5.7
EN 1822-3:2012 EN 149-2001
EN 14683:2005 IEST-RP-CC021.1 NIOSH 42 CFR Part 84
Mask Bacterial Filtration Efficiency Tester(BFE)
Bacterial Filtration Efficiency Tester is used to detect various medical and daily protective mask materials and filter out the percentage of bacteria-containing suspended particles (BFE) under the specified flow rate.
Product principle:
Bacterial Filtration Efficiency Tester is composed of aerosol generating system, aerosol chamber and aerosol transmission device, negative pressure cabinet, 28.3L / min C sampler, etc. The entire detector is controlled by the console. The console uses a microcomputer control system to coordinate and control the work of the aerosol generation system, transmission system, negative pressure cabinet, and sampling system, and displays the working status in real time. The entire measurement work is automatically completed.
Test standard
YY0469-2004,YY/T 0969-2013,ASTMF2100,ASTMF2101,EN14683 ect.
Masks Synthetic Blood Penetration Resistance Tester
Masks Synthetic Blood Penetration Resistance Tester is used for the resistance of medical masks to the penetration of synthetic blood under different blood pressures, it’s also be used to determine the hemodialysis resistance of other coating materials.
Test standard
ISO 22609, ASTM F1862-07
Air Tightness Tester for Mask Exhalation Valve Test Machine
The Air Tightness Tester is mainly used for air tightness testing of masks and respirators under specified conditions. Applicable to masks, respirators and breathing valve manufacturers, quality supervision, scientific research, wearing and other units.
Standard:
GB 2626-2019
Mask flame retardant performance tester
Mask Flame Retardant Performance Tester is used for testing the anti-combustion performance of surgical masks
Standard:
GB19083-2010 technical requirements for medical protective masks
YY 0469-2011 medical surgical mask
Textile Temperature and humidity test Chamber
APPLICATIONS
- To simulate test environment with different temperature and humidity
- Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
- Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
- Uncover test unit weakness in a short-term test with accelerated time effect
CHAMBER DESIGN FEATURES
- High performance and quiet operation (68 dBA)
- Space-saving designed for flush installation to wall
- Full thermal break around doorframe
- One 50mm diameter cable port o left, with flexible silicone plug
- Direct water supply connection for continuous operation
- Accurate wet/dry-bulb humidity measurement system for easy maintain
PROGRAMMABLE CONTROLLER
- PIC controller for test chamber
- Step types include: ramp, soak, jump, auto-start, and end
- RS-232 interface to connect computer for output
Sweating Thermal Test Chamber
Sweating Guarded Hotplate is the most professional, stable and advanced Thermal and Evaporative Resistance test instrument in the world.
Human skin simulation test plate, automatic water supply system, wind speed stabilization system, test host and climate chamber completely separated design. Automatically adjust the height of the hotplate according to the thickness of the test sample, ensures the wind sensor is 15mm above the hotplate.
1.2 Standards
l ISO 11092
l ASTM F 1868
l ASTM D 1518
l GB / T 11048
l JIS L1096-2010
Water Cooling Light fastness tester (xenon arc)
Used in rubber, plastics, paints, coatings, petrochemicals, automobiles, textiles and other industries and materials for solar radiation simulation of light color fastness, flashing color fastness and photoaging, through simulation of light, rain, spray The climatic conditions such as light and dark alternation, temperature and humidity, etc., to determine the fading, aging, fading, transmittance, peeling, hardening, softening and other performance changes of the material.
Testing standard
AATCC 16.3
EN ISO 105 B02
Flammability Tester
Used to test the burning properties of textile fabrics, such as clothing fabrics, decorative fabrics, tent fabrics, etc.
Testing standard:
GB/T 14644 Textiles – Determination of burning rate in 45° direction
16CFR 1610 American clothing fabric flame retardant standard
ASTM D1230 for textile flammability testing
Rotary Crock Meter
Rotary Crockmeter is used for testing the transference of color from the surface of one material(particularly for printer fabrics) to another by either wet or dry rubbing.Specimens are rubbed with dry, standard cotton cloth (Crocking cloth) and again,if applicable,with wet cloth.The staining of the crocking cloths is assessed with the Grey Scale.
USAGE:
To determine the amount of color transferred from the surface of colored textile materials to other surfaces by rubbing, especially to prints where the singling out of areas smaller than possible to test with the standard AATCC Crockmeter.
TESTING STANDARDS:
AATCC 116-2013 Colorfastness to Crocking: Rotary Vertical Crockmeter Method
ISO 105-X16 Textiles — Tests for colour fastness — Part X16: Colour fastness to rubbing — Small areas
Air Cooling Light Fastness Tester (xenon arc)
This machine designed to meet the requirements of ISO 105 B02 and AATCC Test Method 16 standards. It has a rotating specimen rack and provides precise control of critical test parameters including spectrum, irradiance, relative humidity, chamber temperature and black standard temperature.
Usage
To determine the resistance of the color of textiles to fade when exposed to artificial light (xenon arc) which is representative of natural daylight.
Testing standards
ISO 105-B02 Textiles — Tests for color fastness — Part B02: Color fastness to artificial light: Xenon arc fading lamp test
ISO 105-B04 Textiles — Tests for color fastness — Part B04: Color fastness to artificial weathering: Xenon arc fading lamp test
ISO 105-B07 Textiles — Tests for color fastness — Part B07: Color fastness to light of textiles wetted with artificial perspiration
AATCC TM 16 – Option 3 Colorfastness to Light: Xenon-Arc
M&S C9 Colorfastness to Light
M&S C9A Colorfastness to wet light in the presence of alkaline or other chemical residues
JIS L 0843 Test method for color fastness to xenon arc lamp light
JIS L 0888 Test method for color fastness to light and perspiration Method B
IS 15203 Textiles – Method of Test for Determination of Color Fastness of Textile Materials to Artificial Light at High Temperatures – Xenon Arc Fading Lamp Test
Water Spray Tester
Water repellency is an important property of textile fabrics to measure the efficiency of water resistant/repellant finishing applied on textiles.Spray Rating Tester is the appropriate equipment to test the property spraying a specified volume of distilled water is sprayed on a Test specimen, which has been mounted on a ring and placed at an angle of 45°, so that the center of the specimen is 150mm below the spray nozzle. The Spray rating is determined by comparing the appearance of the specimen with AATCC Spray Test Rating Chart.
Usage
To determine the water repellency or surface wetting resistance of fabrics. Appearance of the specimen is compared against photographic chart.
Test standard
AATCC 22-Water repellency: spray test
textiles light fastness tester
Introduction:
textiles light fastness tester designed to meet the requirements of ISO 105 B02 and AATCC Test Method 16 standards. It has a rotating specimen rack and provides precise control of critical test parameters including spectrum, irradiance, relative humidity, chamber temperature and black standard temperature.
Usage:
textiles light fastness tester to determine the resistance of the color of textiles to fade when exposed to artificial light (xenon arc) which is representative of natural daylight.
Testing Standards:
ISO 105-B02 Textiles — Tests for color fastness — Part B02: Color fastness to artificial light: Xenon arc fading lamp test
ISO 105-B04 Textiles — Tests for color fastness — Part B04: Color fastness to artificial weathering: Xenon arc fading lamp test
ISO 105-B07 Textiles — Tests for color fastness — Part B07: Color fastness to light of textiles wetted with artificial perspiration
AATCC TM 16 – Option 3 Colorfastness to Light: Xenon-Arc
M&S C9 Colorfastness to Light
M&S C9A Colorfastness to wet light in the presence of alkaline or other chemical residues
JIS L 0843 Test method for color fastness to xenon arc lamp light
JIS L 0888 Test method for color fastness to light and perspiration Method B
IS 15203 Textiles – Method of Test for Determination of Color Fastness of Textile Materials to Artificial Light at High Temperatures – Xenon Arc Fading Lamp Test
AUTOMATIC HYDRAULIC DIAPHRAM BURSTING TESTER
- ASTM D 3786 Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics
- Diaphragm Bursting Strength Tester Method
- BS 4768 Determination of Bursting Strength and Bursting Distension
- ISO 13938-1 Textiles – Bursting properties of fabrics, Hydraulic method for determination of bursting strength and bursting distension
- ISO 2758 Paper – Determination of bursting strength
- ISO 2759 Board – Determination of bursting strength
- ISO 3303 Rubber – or plastics-coated fabrics – Determination of bursting strength – Hydraulic method
- WSP 030.1.R3(12),BS 3424(PT6),ERT 80-4-20,EN 12332-2,IWS TM 29,ASTM D751,JIS L-1018
Hydrostatic Pressure Tester
- PRODUCT DESCRIPTION:It is used for testing the water permeability resistance to the compact cloth such as canvas, linoleum, tenting, tarpaulin, non-woven fabrics, rain resistant dress fabrics, coating fabrics and so on.DESIGN CRITERIA:AATCC 127 DIN 53886 JIS L1092
Automatic Wrap Reel For Textile
- ASTM D1907 Textile Testing Equipment Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
- ASTM D2260 Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
- ISO 2060 Textiles — Yarn from packages — Determination of linear density (mass per unit length) by the skein method
- BS 2010 Method for determination of the linear density of yarns from packages
- DIN 53830 Testing of textiles; determination of linear density of single and plied yarns (reel method)
CO2 GAS ANAKLYSER APPARATUS
This machine used to measure the residual carbon dioxide (dead zone) in the respirator, escape device and other protective masks; it is suitable for respiratory protection product testing institutions and respirator manufacturers to test and evaluate the performance of the masks used by respirator products.
EN149-2001
SPRAY CHAMBER
- ISO 16602- EN 14605
- AATCC 127 DIN 53886 JIS L1092
- ISO 6530
Single Yarn Strength Tester for Cotton
- GB/T 14344,GB/T 3916,ISO 2062,ASTM D2256
textile salt corrosion test chamber
textile water bath tester
N95 RESPIRATORS-ISOAMYL ACETATE TIGHTNESS TESTER
- It is used for testing the air tightness detection of the breathing valve of the self-priming filter type anti-particle respirator
- Leakage rate (EN 149-2001+A1-2009)
Static Stretch & Recovery Tester
Standard : ASTM D2594 :To determine the elastic fabric under a certain tension to stretch the specified elongation and then recovery
Automatic Washer
- ISO 6330-2012 , GB/T 8629 ,FZ/T 70009,IEC 60456
- BS 4923 Methods for individual domestic washing and drying for use in textile testing
- BS EN ISO 6330 Textiles. Domestic washing and drying procedures for textile testing
Button Impact Test Machine
- GB/T 22704-2008 test method of button strength
- BS 7907-1997, MOD
Testing of Finished Textile Products
- EN 71, BS 4162, EN 1492, BS 3084
- Everyday we encounter countless textile components such as straps on bags, buttons, or toys made of textiles. They are subject to constant loading and must fulfill certain quality characteristics to be able to meet safety criteria reliably (for example, buttons, straps, belt connectors). The reproduction of real-world conditions sometimes requires complex test arrangements, different specimen grips, and reliable results. ZwickRoell offers a wide-ranging product portfolio to cover a large variety of tasks.
Yarn Twist Tester
- ASTM D1422 Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
- ASTM D1423 Standard Test Method for Twist in Yarns by Direct-Counting
- ISO 2061 Textiles — Determination of twist in yarns — Direct counting method
- BS 2085 Method of test for determination of twist in yarns, direct counting method
- DIN 53832 Testing of textiles — Determination of the twist of single and plied yarns and of the change of length. untwist method
Durawash Tester Fabric Durability Test
- The Durawash simulates the conditions necessary to meet leading chain stores standard garment and fabric durability tests. The physical performance of the Durawash is compatible with that of the “Hoovermatic” Twin Tub and complies with the Marks and Spencer Fabric Durability (C15) and Print Durability (P5) methods of test.
- Marks & Spencer P5, C15, 8A, 8B, 8C ,BS
Tumble Dryer
- For fabrics, clothing or other textiles finished after tumble drying shrinkage test.
- GB/T 8629、ISO 6330
Fabric Extensometer
- It is used to determine the stretch & recovery of the fabric in case of both woven & knitted fabrics. A very useful Equipment to evaluate the Stretch & Recovery of woven, Knitted / Elastic or Lycra Fabric. It gives the percentage of stretch directly. The fabric can be loaded with weight from 1 to 5 Kg. The dead weights 2 Kg. (2 Nos.) and 1 Kg. (1 No.) are provided with the Extensiometer to load the fabric.
- To simply and economically determine the stretch and recovery of textile fabrics,both knitted and woven.
- BS 4294 Methods of test for elastic fabrics
Softness Tester
- GB/T 8942 the determination of the softness of paper
LIQUID LOSS TESTER
ABSORPTION TESTER
- Test methods for the evaluation of some aspects of the behaviour of nonwoven fabricsin the presence of liquids. In particular(the liquid absorbency time; the liquid absorptive capacity; the liquid wicking rate)
- ISO 9073-6:2000 Textiles – Test methods for nonwovens Part 6: Absorption
Liquid Strike Through Time Tester
- The test method is designed to determine the liquid-stirke-through time of nonwoven coverstocks.
Electronic & Pneumatic Crock meter
- AATCC 8 Colorfastness to Crocking: AATCC Crockmeter Method
- AATCC 165 Colorfastness to Crocking: Textile Floor Coverings—Crockmeter Method
- ISO 105-X12 Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing
- BS 2543, BS 3424: Part 14, M&S C08, IKEA IOS-TM-0002, Mercedes Benz DBL 7384
Microscope
- It is used for fiber fineness measurement and blended fiber blended content of the test, and it can shows the cross-sectional shape of the hollow fiber and the shaped fiber for observation.It collects the longitudinal and cross – sectional microscopic images of the fibers by a digital camera and the fiber longitudinal diameter data can be quickly realized by software assistant.It has fiber type labeling, statistical analysis, EXCEL output, electronic reports and other functions.
- ISO 137, ISO 17751.
Universal Wear Tester(UWT)
The tester can detect all kinds of fabrics, including clothing, shoes and industrial textiles wear properties, flat grinding discoloration performance, surface anti-pilling performance. It can also be used to test the wear resistance of textiles in various ways (such as flexing, film, etc.) and for the flat grinding discoloration of textiles (such as wire mesh, emery).
AATCC 119、120、ASTM D3514、3885、3886、JIS L1096
Random Tumble Pilling Tester
- Pilling and other changes in surface appearance, such as fuzzing, that occur in normal wear are simulated on a laboratory testing machine. Pills are caused to form on fabric by a random rubbing action produced by tumbling specimens in a cylindrical test chamber lined with a mildly abrasive material. To form pills with appearance and structure that resemble those produced in actual wear, small amounts of short-length gray cotton fiber are added to each test chamber with the specimens. The degree of fabric pilling is evaluated by comparison of the tested specimens with visual standards that may be actual fabrics, or photographs of fabrics, showing a range of pilling resistance. The observed resistance to pilling is reported using an arbitrary rating scale.Random Tumble Pilling Tester is specially designed equipment to determine the pilling and fuzzing characteristics of textile fabrics.
- Application: To determine the pilling and fuzzing characteristics of textile fabrics.
- ASTM D3512 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
- ISO 12945-3 Textiles- Determination of the fabric propensity to surface pilling, fuzzing or matting
- Part 3: Random tumble pilling method
- JIS L 1076 Testing methods for pilling of woven fabrics and knitted fabrics
- DIN 53867 Testing of textile fabrics; determination of pilling with the Random-Tumble-Pilling-Tester
- This cabinet is use for all hook test rating standards, Compare the sample with the standard sample under the specified light source to obtain the rating results
Mace Snag Viewing Cabinet
- GB /T 11047
textile hot pressing plate
textile hot pressing plate is to evaluate the fabric dimensional stability after dry heat treatment, hot melt adhesive lining and its thermal performance
GB/T 17031.1、GB/T 17031.2、FZ/T 01076、FZ/T 01082、FZ/T 01085、ISO 9866-1、ISO 9866-2
Color Assessment Cabinet For Textile
- Color Assessment Cabinet, also a kind of textile testing equipment ,suitable for all industries and applications where there is a need to maintain color consistency and quality-e.g. Automotive, Ceramics, Cosmetics, Foodstuffs, Footwear, Furniture, knitwear, Leather, Ophthalmic, Dyeing, Packaging, Printing, Inks and Textile test.
- Since different light source has different radiant energy, when they arrive on the surface of an article, different colors display. With regard to color management in industrial production, when a checker has compared the color consistence between products and examples, but there may exist difference between light source used here and light source applied by the client. In such condition, color under different light source differs. It always brings following issues: Client makes complaint for color difference even requires for rejection of goods, seriously damaging company credit.
- To resolve the above problem, the most effective way is to check good color under same light source .For example ,international Practice applies Artificial Daylight D65 as standard light source for checking goods color.
- Textile Color Assessment Cabinet is very important to use standard light source to check color difference in night duty.Besides D65 light source ,TL84,UV, and F/A light sources are available in this Lamp Cabinet for metamerism effect.
Features:
- Provide several light sources, i.e. D65, TL84, UV, F/A
- Apply microcomputer to switch between the light sources quickly.
- Super timing function to record use time of each light source separately.
- All fittings are imported, ensuring quality.
- Product size is 675mm*455mm*415mm.
Textile Needle Detector
also a kind of textile testing equipment ,is used to detect the broken needles in textile, shoe nail, iron wire and other metal pieces left inside toys, garments, textile ,shoes ,textile testing ,etc.
PARTICULATE FILTRATION EFFICIENCY (PFE) TESTER
It is suitable for fast, accurate and stable detection of particulate filtering efficiency of various medical and daily protective masks, respirators, etc.
GB/T 19083-2010 5.4
GB 2626-2019 6.3
GB 19082-2009 5.7
EN 149
Color Fastness Perspiration tester
To determine color fastness to water and perspiration in textiles. It’s also employed to predict the potential of white or pastelcoloured textiles to yellow in transit or storage.
Test procedure
To test colour fastness to perspiration, specimens (fabric, yarn or fibre) in contact with Multifibre Adjacent Fabric, are treated in two different solutions containing histidine, one alkaline and one acidic. The specimens are subsequently drained and placed under constant pressure between separator plates in the Perspirometer. Up to 20 test specimens can be accommodated.
The units are then placed in an Incubator for 4 hours at 37˚C (body heat).
After drying, change in colour of the specimens and staining of the adjacent fabrics are assessed with Grey Scales.
Separate Perspirometer units must be used for alkaline and acidic tests to avoid chemical interaction.
DOLOMITE DUST CLOGGING TEST
It is mainly used to test the amount of dust collected on the filter when the airflow passes through the filter by way of inhalation in a certain dust environment to test the respiratory resistance and filter penetration of the sample when a certain respiratory resistance is reached force.
EN149—8.10,
EN143
APERTOMETER WITH DUMMY HEAD
- This device is used to determine whether the field of view under the mask meets the requirements.
- EN149, GB2626-2019
Glove Cut Resistance Tester
- This Cut Resistance Test Machine is used to test the blade cut resistance of safety gloves, leather, coated fabrics and other materials, but it’s not applied to hard gloves.
Pilli Scope
- The Pilling Assessment Viewer is a specialized viewing booth to undertake the assessment of pilling on fabrics against standard photographs. The unit can be used for assessing the pilling with Martindale pilling, random tumble pilling, ICI pilling samples etc.
- Suitable for all standards where the assessment of pilling on fabrics is necessary, whether against control fabrics or photographs.
- ISO 12945-1, ISO 12945-2, ISO 12945-3, BS 5811, ASTM D3512, ASTM D3514, ASTM D4970
- Arcadia AG26, Next TM26, SN 198525, Woolmark TM196
GSM Cutter
- This machine is applied to cut round sample of all kinds of material of textile, cardboard and non-woven fabric, etc. It can cut all kinds of textile into a specific area round sample rapidly and accurately.
- (Note: it needs to use combining into precise electronic balance.)
- This machine can cut 100 cm2 standard samples accurately, and combining electronic balance, it can weigh the unit weight (gram weight) of the tested things
Digital Fabric Crease Recovery Tester
It is used to test the recovery performance of textiles after folding.
GB/T3819 ,ISO2313 ,AATCC66 ,M&S and so on
Soxhlet Extraction Kit
- Used for testing the fat content of feathers.
- IDFB Part 4
Fabric Thickness Tester
- Used to determine the thickness of various textiles, textile products and nonwovens.
- ISO3616 And ASTMD1777
Fluorescent Light Tester
- Used to test if the sample contains fluorescent whitening agents.
Hot Pressing for Colour Fastness
- Textiles for ironing and sublimation color fastness test.
- ISO 105-X11:Textiles:Tests for colour fastness; Part X11 : Colour fastness to hot pressing
Tumble Dryer
- For fabrics, clothing or other textiles finished after tumble drying shrinkage test.
- GB/T 8629、ISO 6330
ICI Mace Snag Tester
- This tester is specially designed equipment to determine the snagging resistance of a fabric.
- To rapidly determine the snagging resistance of robust apparel and furnishings fabrics.
- ASTM D3939 Standard Test Method for Snagging Resistance of Fabrics (Mace Test Method)
- JIS L 1058 Test methods for snag of woven fabrics and knitted fabrics
- VDA 230-220 Textiles for the automotive interiors – Determining the thread puller tendency of textiles
- Mace Snag test
Fabric Density Meter
Fabric Density Meter,also as a kind of textile testing equipment, to determine the thread density of woven fabrics and wire meshes as well as the loop density of knitted fabrics.
Textile Elmendorf Tearing Test Equipment
Textile Elmendorf Tearing Test Equipment to determine the ballistic tearing strength of woven fabrics, plastic films, paper, or other similar materials.
Textile: ASTM D1424, DIN 53862, EN ISO 13937-1, ISO 4674-2, ISO 9290, M&S P29, NEXT 17
Plastics: ASTM D1922, ISO 6383-2, JIS K 7128-2, NF T54 141
Nonwovens: ASTM D5734, WSP 100.1
Paper: APPITA P 400,ASTM D 689,BS 4468,CSA D9,DIN 53128,EN 21974,ISO 1974
Textile Fabric Wet Resistance Tester
Textile Fabric Wet Resistance Tester ,also as a kind of textile testing equipment,has not been used for a variety or water resistant or water repellent finishing fabric surface moisture resistance (wet level) testing.
ISO 4920、AATCC 22、BS 3702、NEXT 23、WSP 080.1.R4 (12) 、BS EN 24920、M&S P23
Ironing Sublimation Color Fastness Tester
GB/T 5718-1997 textile color fastness test Except dry heat resistance (thermal) color fastness
GB/T 6152-1997 textile color fastness test Hot pressing fastness
ISO 105 – P01:105 textile color fastness test The P01part: resistance to dry heat (thermal) color fastness
ISO 105 – X11:105 textile color fastness test The X11 part: hot pressing fastness
JIS L0879:2005 the fastness to dry heat
JIS L0850:1994 Colour fastness test to hot pressing method
Textile Colour Fastness To Washing Tester
Textile Colour Fastness To Washing Tester ,also as a kind of textile testing equipment,is applied to determine the textile dye washing color fastness, resistant to washing, resistant to dry cleaning and resistant to shrink of textile cotton, wool, silk jute and chemical fiber textiles.
ISO 105-C06,ISO 105-C08,ISO 105-C09,ISO 105-C10,ISO 105-D01,ISO 105-E03
AATCC 61,190 AATCC 86,132
M&S C04,M&S C05, M&S C10A, M&S C12A, M&S C37
BS 1006,JIS L0844
Be the first to review “Textile Test Machines”