Wood-based panels, Plywood, Particleboards Test Machiunes

  • BS EN 310:1993 – Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
  • BS EN 311:2002 – Wood-based panels. Surface soundness. Test method.
  • BS EN 314-1:2004 – Plywood.  Bonding quality.  Test methods.
  • BS EN 314-2:1993 – Plywood.  Bonding quality.  Requirements.
  • BS EN 315:2000 Plywood Tolerances for dimensions.
  • BS EN 317:1993 – Particleboards and fibreboards. Determination of swelling in thickness after immersion in water.
  • BS EN 318:2002 Wood-based panels. Determination of dimensional changes associated with changes in relative humidity.
  • BS EN 319:1993 – Particleboards and fibreboards. Determination of tensile strength perpendicular to the plane of the board.
  • BS EN 320:2011 – Particleboards and fibreboards. Determination of resistance to axial withdrawal of screws.
  • BS EN 321:2002 – Wood-based panels. Determination of moisture resistance under cyclic test conditions.
  • BS EN 322:1993 – Wood-based panels. Determination of moisture content.
  • BS EN 323:1993 – Wood-based panels. Determination of density.
  • BS EN 324-1:1993 Wood-based panels. Determination of dimensions of boards. Determination of thickness, width, length.
  • BS EN 324-2:1993 Wood-based panels. Determination of dimensions of boards. Determination of squareness and edge straightness.
  • BS EN 325:2012 – Wood-based panels. Determination of dimensions of test pieces.
  • BS EN 326-1:1994 – Wood-based panels. Sampling, cutting and inspection. Sampling and cutting of test pieces and expression of test results.
  • BS EN 326-2:2010+A1:2014 – Wood-based panels. Sampling, cutting and inspection. Initial type testing and factory producton control.
  • BS EN 326-3:2003 – Wood-based panels. Sampling, cutting and inspection. Inspection of an isolated lot of panels.
  • BS EN 335:2013 – Durability of wood and wood-based products. Use classes: definitions, application to solid wood and wood-based products.
  • BS EN ISO 354:2003 – Acoustics. Measurement of sound absorption in a reverberation room.
  • BS EN 382-1:1993 – Fibreboards. Determination of surface absorption. Test method for dry process fibreboards.
  • BS EN 382-2:1994 – Fibreboards. Determination of surface absorption. Test method for hardboards.
  • BS EN 383:2007 -Timber structures. Test methods. Determination of embedment strength and foundation values for dowel type fasteners
  • BS EN 594:2011 – Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels.
  • BS EN 596:1995 – Timber structures. Test methods. Soft body impact test of timber framed walls.
  • BS EN 635-1:1995 – Plywood. Classification by surface appearance. General.
  • BS EN 635-2:1995  – Plywood. Classification by surface appearance. Hardwood.
  • BS EN 635-3:1995 – Plywood. Classification by surface appearance. Softwood.
  • CEN/TS 635-4:2007 – Plywood. Classification by surface appearance. Parameters of ability for finishing. Guideline.
  • BS EN 635-5:1999 – Plywood. Methods for measuring and expressing characteristics and defects.
  • BS EN ISO 717-1:2020 – Acoustics. Rating of sound insulation in buildings and of building elements.
  • BS EN 717-1:2004 – Wood-based panels. Determination of formaldehyde release. Formaldehyde emission by the chamber method.
  • BS EN 717-3:1996 – Wood-based panels. Determination of formaldehyde release. Formaldehyde release by the flask method.
  • BS EN 789:2004 – Timber structures. Test methods. Determination of mechanical properties of wood based panels.
  • BS EN 1058:2009 – Wood-based panels. Determination of characteristic 5 percentile values and characteristics mean values.
  • BS EN 1087-1:1995 – Particle boards. Determination of moisture resistance. Particle boards. Determination of moisture resistance. Boil test.
  • BS 1088:2018 – Marine plywood. Requirements.
  • CEN/TS 1099:2007 – Plywood. Biological durability. Guidance for the assessment of plywood for use in different use classes.
  • BS EN 1128:1996 – Cement-bonded particleboards. Determination of hard body impact resistance.
  • BS EN 1156:2013 – Wood-based panels. Determination of duration of load and creep factors.
  • BS EN 1195:1998 – Timber structures. Test methods. Performance of structural floor decking.
  • BS EN 1328:1997 – Cement-bonded particleboards. Determination of frost resistance.
  • BS 1982-0:1990 – Fungal resistance of panel products made of, or containing materials of organic origin. Guide to methods for determination.
  • BS 1982-1:1990 – Fungal resistance of panel products made of, or containing materials of organic origin. Method for determinatio of resistance to wood-rotting Basidiomycetes.
  • BS 1982-2:1990 – Fungal resistance of panel proudcts made of, or containing materials of organic origin. Method for determination of resistance to cellulose-deomposing microfungi.
  • BS 1982-3:1990 – Fungal resistance of panel proudcts made of, or containing materials of organic origin. Method for determination of resistance to mould or mildrew.
  • BS 4965:1999 – Decorative laminated plastics sheet veneered boards and panels.
  • BS 5234-2:1992 – Partitions (including matching linings) – Specification for performance requirements for strength and robustness including methods of test.
  • BS EN ISO 10140-3:2010+A1:2015 – Acoustics.  Laboratory measurement of sound insulation of building elements. measurement of impact sound insulation.
  • DD ENV 12038:2002 – Durability of wood and wood-based products.  Wood-based panels. Method of test for determining the resistance against wood destroying Basidiomycetes.
  • BS EN 12114:2000 – Thermal performance of buildings. Air permeability of building components and building elements. Laboratory test methods
  • ISO 12460-1:2007 – (Edition 1) Wood-based panels. Determination of formaldehyde release. Formaldehyde emission by the 1-cubic metre chamber method.
  • BS EN ISO 12460-3:2020 – Wood-based panels. Determination of formaldehyde release. Gas analysis method.
  • BS EN ISO 12460-4:2016 – Wood-based panels. Determination of formaldehyde release.  Desiccator method.
  • BS EN ISO 12460-5:2015 – Wood-based panels. Determination of formaldehyde release. Extraction method (called the perforator method).
  • BS EN ISO 12572:2016 – Hygrothermal performance of building materials and products. Determination of water vapour transmission properties. Cup method.
  • BS EN 12664:2001 – Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Dry and moist products of medium and low thermal resistance.
  • BS EN 13017-1:2001 – Solid wood panels. Classification by surface appearance. Softwood.
  • BS EN 13017-2:2001 – Solid wood panels. Classification by surface appearance. Hardwood.
  • BS EN 13354:2008 – Solid wood panels (SWP). Bonding quality. Test method.
  • BS EN 13446:2002 – Wood-based panels. Determination of withdrawal capacity of fasteners.
  • BS EN 13879:2002 – Wood-based panels. Determination of edgewise bending properties.
  • BS EN ISO 13894-2:2015 – High pressure decorative laminates. Composite elements. Specificaitons for composite elements with wood-based substrates for interior use.
  • BS EN 14272:2011 – Plywood. Calculation method for some mechanical properties.
  • BS EN 14323:2017 – Wood-based panels. Melamine faced boards for interior uses. Test methods.
  • PD CEN/TR 14823:2003 – Durability of wood and wood-based products. Quantitative determination of pentachlorophenol in wood. Gas chromatographic method.
  • DD CEN/TS 14966:2005 – Wood based panels.  Small scale indicative test methods for certain mechanical properties.
  • PD CEN/TR 16220:2011 – Construction products – Assessment of release of dangerous substances – Complement to sampling.
  • ISO 22452:2011 ED1 – Timber structures.  Structural insulated panel walls. Test methods.

Reviews

There are no reviews yet.

Be the first to review “Wood-based panels, Plywood, Particleboards Test Machiunes”